Leon Mk2
Part II |
1 - | Closing bolt, 25 Nm |
2 - | Seal |
q | Replace |
3 - | Oil radiator |
q | Maintain a sufficient gap with respect to adjacent parts |
q | Observe the note → Chapter |
4 - | Seal |
q | Replace |
q | Hold with the lips provided on the oil radiator |
5 - | Support |
6 - | 10 Nm |
7 - | Seal ring |
q | In the case of seal failure, cut and replace the seal ring |
8 - | Closing bolt, 10 Nm |
9 - | Closing bolt, 40 Nm |
q | Do not open |
10 - | Spring |
q | For discharge valve approx. 5 bar |
11 - | Piston |
q | For discharge valve approx. 5 bar |
12 - | Oil pressure switch from 0.7 bar -F1-, 25 Nm |
q | Brown |
q | Checking → Chapter |
13 - | Seal ring |
q | In the case of seal failure, cut and replace the seal ring |
14 - | Seal |
q | Replace |
15 - | 15 Nm + 1/4 turn (90°) |
q | Replace |
q | First fit the upper left and lower right bolts and then tighten the four bolts in a cross form |
16 - | Oil filter support |
17 - | Seal ring |
q | Replace |
18 - | Closing bolt, 20 Nm |
19 - | Stopper |
q | Release and tighten with the oil filter valve -T20050- |
20 - | O ring |
q | Replace |
21 - | Oil filter cartridge |