| –
| Fit the coolant pump with the rear toothed belt guard and tighten the pump securing bolts. |
| –
| Tighten the securing bolts on the rear toothed belt guard. |
|
| Tightening torque: 10 Nm (fit with D6) |
| –
| Fit the camshaft sprocket. To do this, immobilise the camshaft by bracing the sprocket with counter-hold tool -T20018A- and tighten the new securing bolt. |
|
| Tightening torque: 20 Nm + 1/4 turn (90°) |
|
|
|
