seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Renewing crankshaft sealing flange, flywheel end > < Removing

Leon Mk2

Fitting
Fitting
–  Lightly oil sealing lip of oil seal
–  Slide oil seal over guide sleeve -T20081B/2-.
   
–  Place set onto crankshaft stub.
–  Use guide sleeve -T20081B/1- and press guide sleeve-oil seal assembly as far as it will go until the seal is flush. To do this, use the old securing bolt for crankshaft toothed belt.
–  Remove guide sleeve -T20081B/2-.
  E13-0238
–  Fit crankshaft toothed belt sprocket and lock it with counter-hold -T20018A-.
–  Tighten new centre bolt :
   Tightening torque 90 Nm + 1/4 turn (90°).
–  Fit the toothed belt → Chapter.
  E13-0016

Renewing crankshaft sealing flange, flywheel end > < Removing