| When working on the fuel supply/injection system, pay careful attention to the following “5 rules” of cleanliness: |
| t
| Thoroughly clean all connections and adjacent areas before disconnecting. |
| t
| Place dismantled parts onto a clean surface and cover them. Use lint-free cloths! |
| t
| If repairs cannot be completed in one session, all parts and components that are left open should be covered or stored with the greatest of care. |
| t
| Only install clean components: |
| Only unpack replacement parts immediately prior to installation. |
| Do not install parts that have been stored loose (e.g. in tool boxes etc.). |
| t
| When the system is open: |
| Do not work with compressed air if this can be avoided |
| Do not move the vehicle unless absolutely necessary. |
|
|
|
