Leon Mk2
Engine speed sender -G28-: checking |
Note
The engine speed sender -G28- is a speed and reference mark sender. If there is no speed signal, the engine will not start. If the speed signal fails when the engine is running, the engine stalls. |
Fitting location → Item |
Special tools and workshop equipment required |
t | Hand multimeter -V.A.G 1526 A- or -V.A.G 1715- |
t | auxiliary measuring set -V.A.G 1594 A- or -V.A.G 1594 C- |
t | Test box -V.A.G 1598/22- |
t | Current flow diagrams |
|
|
|
Connector, contact | Connector, contact |
1 (positive) | 3 (earth) |
Switch ignition on | |
Specification: 4.5 V min. |
|
|
|
Connector, contact | Test box -V.A.G 1598/22-, socket |
1 | 62 |
2 | 53 |
3 | 67 |
Specification: 1.5 Ω max. |
|
|