Leon Mk2
| Dismantling and assembling fuel rail with injectors |
| 1 - | Distribuidor de combustible |
| q | Removing and installing → Anchor, checking spray pattern and injectors for leaks |
| 2 - | 10 Nm |
| 3 - | Retaining clip |
| q | Check seated securely |
| 4 - | O-ring |
| q | Renew if damaged |
| q | Before installing moisten with clean engine oil |
| 5 - | Fuel pressure regulator |
| q | Checking → Chapter, checking fuel pressure regulator and holding pressure |
| 6 - | Vacuum hose |
| q | To intake manifold → Item |
| 7 - | Retaining clip |
| q | Ensure seated correctly at injector and fuel rail |
| 8 - | O-ring |
| q | Renew |
| q | Before installing moisten with clean engine oil |
| 9 - | Injectors (-N30-...-N33-) |
| q | Checking → Chapter |
| q | Resistance 12.0...17 Ω |
| 10 - | Return hose |
| q | Blue or with blue marking |
| q | Secure with spring-type clips |
| q | Check securely seated |
| q | To the fuel delivery unit in fuel tank → Item |
| 11 - | Supply hose |
| q | Black with white marks |
| q | Secure with spring-type clips |
| q | Check securely seated |
| q | From fuel filter → Item |
