| –
| Remove the pulley, and the upper and lower guards of the toothed belt. |
| –
| Loosen the camshaft pinion (use countersupport -T20018-). |
| –
| Loosen the tensioning roller and remove the toothed belt, move the crankshaft backward a bit. |
| –
| Remove the camshaft pinion. |
| –
| Remove the back guard of the toothed belt from the cylinder head. |
| –
| Remove the cylinder head cover. |
| –
| Remove the ignition distributor, mark the position matching the cap and bear in mind when carrying out assembly. |
|
|
|
