SEAT Workshop Service and Repair Manuals > Leon Mk2 > Power unit | 4-cyl. injection engine (1.6 l engine) | Engine lubrication | Removing and installing parts of the lubrication system | Removing and installing sump

Removing

–	Remove the central soundproofing sump then the left and right: → General body repairs; Rep. Gr.50.

–	Drain engine oil.

–	Remove the bolts that hold the sump to the engine and to the gearbox.

–	Remove sump, it may be necessary to release sump by tapping lightly with a rubber head hammer.

–	Remove sealant residue on cylinder block with a flat scraper.

–	Remove sealant residue on the sump with a rotating brush, e.g. a hand drill with a plastic brush (wear protective glasses).

–	Clean sealing surface, must be free of oil and grease.

SEAT Workshop Service and Repair Manuals