Leon Mk2
Silencer with fasteners |
1 - | Front exhaust pipe with catalyst |
2 - | M8: 25 Nm; M10: 40 Nm |
3 - | Mark |
4 - | Dimension -a- = approx. 5 mm |
5 - | Double clamp |
6 - | Flattened nut |
7 - | Pre-silencer → Note |
8 - | 25 Nm |
9 - | Union arrester |
10 - | Safety ring |
q | according to versions |
11 - | Fastening element |
q | Replace if deteriorated |
12 - | Suspension element |
q | Replace if deteriorated |
13 - | Rear silencer → Note |
14 - | Double repair clamp |
q | It must be seated up to the marks → Item |
15 - | Mark |
q | For double repair clamp → Item |
16 - | Cutting point |
q | In case of repair → Note → Fig. |
1) | In the regular version, the presilencer and the rear silencer are a single part. For repair purposes, the presilencer and the rear silencer are supplied as separate parts, with a double clamp → Item. Cut the union pipe perpendicularly at the cutting point → Item with -U-40075-. |