Leon Mk2
Fitting locations overview: Engine codes AEH, AKL |
1 - | 3 pin connector |
q | Black for Hall sender -G40- |
2 - | Hall sender -G40- |
q | Below the upper toothed belt guard |
3 - | Lambda probe -G39-, 50 Nm |
q | Location for exhaust manifold |
4 - | 4 pin connector |
q | Brown for Lambda probe 1 -G39- |
5 - | Intake manifold change-over valve -N156- |
6 - | Throttle valve control part -J338- |
7 - | Coolant temperature sender -G62- |
8 - | Air mass meter -G70- with intake air temperature sender -G42- |
9 - | Engine control unit |
q | Control unit for Simos injection and ignition system -J361- |
10 - | Earth connection |
q | On gearbox |
11 - | Ignition coils (-N-, -N128-) |
q | With output stage -N122- |
q | → Item |
12 - | Engine speed sender -G28- |
13 - | 3 pin connector |
q | For knock sensor 1 -G61- |
14 - | 3 pin connector |
q | Grey for engine speed sender -G28- |
15 - | Knock sensor 1 -G61- |
q | → Item |
16 - | Injector (-N30-…-N33-) |
17 - | Fuel pressure regulator |
18 - | Power steering manometric switch -F88- |
19 - | Activated charcoal filter solenoid valve 1 -N80- |
q | Activated charcoal filter system → Chapter |
20 - | Activated charcoal filter |
q | Activated charcoal filter system → Chapter |