Leon Mk2
| Parts of cooling system body side |
| 1 - | Radiator |
| q | Removing and installing → Chapter |
| q | After replacing renew entire coolant |
| 2 - | Upper coolant hose |
| q | Secured to radiator with retaining clip |
| q | Check securely seated |
| q | Coolant hose connection diagram → Chapter |
| 3 - | Radiator fan |
| 4 - | Additional fan |
| 5 - | Air ducting |
| 6 - | 10 Nm |
| 7 - | Bracket |
| q | For radiator fan connector |
| 8 - | Connector |
| 9 - | Expansion tank |
| 10 - | Cap |
| q | Check with cooling system tester -V.A.G 1274- or -SAT 1274- and adapter -V.A.G 1274/4- |
| q | Test pressure 1.4 … 1.6 bar |
| 11 - | From upper coolant pipe |
| q | Upper pipe insert |
| q | Coolant hose connection diagram → Chapter |
| 12 - | To coolant pipe |
| q | Coolant hose connection diagram → Chapter |
| 13 - | Lower coolant hose |
| q | Coolant hose connection diagram → Chapter |
| 14 - | 15 Nm |
| 15 - | Thermo-switch -F18-, 35 Nm |
| q | 35 Nm |
| q | For electric fan |
| q | Switching temperatures: Stage 1 on: 92 … 97 °C off: 84 … 91 °C Stage 2 on: 99 … 105 °C off: 91 … 98 °C |
| 16 - | Bracket |
| q | For radiator |
| q | Note fitting position |
