Leon Mk2
| Dismantling and assembling intake manifold |
| 1 - | Bleed pipe |
| q | From tank breather valve in activated charcoal filter canister → Item |
| 2 - | Support |
| 3 - | Depression valve |
| 4 - | Flexible pipe for depression |
| q | It leads to the control unit for the butterfly -J338- |
| 5 - | 10 Nm |
| 6 - | Flexible pipe |
| q | It leads from the oil separator → Item |
| 7 - | Throttle valve control unit -J338- |
| 8 - | Seal |
| q | Renew if damaged |
| 9 - | Vacuum hose |
| q | From fuel pressure regulator → Item |
| 10 - | 20 Nm |
| 11 - | Intake manifold |
| q | Removing and installing → Chapter |
| 12 - | From brake servo |
| 13 - | Seal |
| q | Renew |
| 14 - | O ring |
| q | Renew if damaged |
| 15 - | Intake manifold pressure sender -G71- with intake air temperature sender -G42- |
| q | Intake air temperature sender resistance values between contacts 1 and 2 → Fig. |
| 16 - | 3 Nm |
| 17 - | Admission nozzle |
| q | For flexible pressure release pipe → Item |
