| To prevent injuries to persons and/or damage to the fuel injection and ignition system, the following must be noted: |
| t
| Do not touch or disconnect ignition wiring when the engine is running or being turned at starter speed. |
| t
| The ignition must be switched off before connecting or disconnecting injection or ignition system wiring or tester cables. |
| t
| If the engine is to be turned at starter speed, without starting, e.g. when checking compressions, pull plug off Hall sender (distributor). |
| t
| Do not connect a capacitor to terminal 1 (-). |
| t
| Do not replace 1 kΩ (identification: R1) with a different type even for radio interference suppression. |
| t
| For suppression purposes only 1 kΩ resistances are to be used on the H.T. leads and 5 kΩ spark plug connectors. |
|
|
|
