Leon Mk2
Dismantling and assembling fuel rail with injectors |
1 - | Connection (access) |
q | Install with D6 |
q | Tighten supply pipe hose with spring type clips |
q | Supply pipe/hose with black or white markings |
2 - | Seal |
q | Renew |
3 - | Fuel rail |
4 - | O-ring |
q | Renew |
5 - | Fuel pressure regulator |
q | Checking fuel pressure regulator and holding pressure → Chapter |
6 - | Retainer |
7 - | Screw |
q | 2,4 Nm |
8 - | O-ring |
q | Renew |
9 - | Injector -N30-…-N33- |
q | Checking → Chapter |
q | Resistance 14...17 Ω |
10 - | Retaining clip |
q | Ensure seated correctly at injector and fuel rail |
11 - | Seal |
q | Renew |
12 - | Connection piece (exit) |
q | Grease with D6 |
q | Tighten supply pipe hose with spring type clips |
q | Supply pipe/hose with black or white markings |