SEAT Workshop Service and Repair Manuals

Engine assembly mountings Tightening torques   Note The securing bolts of the mountings assembly are expansion bolts and must be replaced.

Securing the engine assembly.

A → Note	20 Nm + 1/4 vuelta (90°)
B → Note	30 Nm + 1/4 vuelta (90°)

1)  Replace

Securing engine assembly, gearbox.

A → Note	50 Nm + 1/4 vuelta (90°)
B → Note	40 Nm +1/4 turn further (90º)

2)  Replace

Pendular support   Note Position the bolts “A” in the oblong holes in the mounting, in such a way that the distance between the gearbox and the assembly transport is as great as possible.

A → Note	30 Nm + 1/4 vuelta (90°)
B → Note	40 Nm + 1/4 vuelta (90°)

3)  Replace