–
| First see if the vehicle has a coded radio. If so, refer to the anti-theft code. |
–
| With the ignition switched off, disconnect battery earth strap. |
Note For those vehicles with the BBU - BLZ engine identification letters, to fit the lock carrier plate in service position it will be necessary to remove the bumper bracket and the air conduit tubes from the intercooler → Chapter. Then, refit the bumper support using the upper bolts before positioning the tool T20070. |
–
| Pull coolant hoses off radiator. |
–
| Pull connector off thermo-switch and radiator fan. |
Vehicles with air conditioning: |
Caution Refrigerant cicuit of air conditioner (heating) must not be opened. |
|
Note To avoid damage to the condenser and refrigerant pipes/sleeves, take care not to bend, twist or stretch the pipes/sleeves excessively. |
–
| Unbolt retaining clamps for refrigerant lines. |
–
| Unscrew the condenser from its attachment to the radiator and secure it to the brake lock carrier. |
All vehicles (continued): |
–
| Remove radiator ducting and electrofans. |
–
| Unscrew radiator bolts and take out radiator and fan. |
|
|
|