Leon Mk2
| Components overview |
| 1 - | 40 Nm |
| 2 - | Pulley / damper |
| q | Removing and fitting: → Chapter |
| 3 - | 25 Nm |
| 4 - | Tensioning device for ribbed belt |
| q | To loosen the belt, use the fixed spanner → Chapter |
| 5 - | Alternator |
| q | Removing and installing → Electrical system; Rep. Gr.27 |
| q | To facilitate fitting the alternator, move threaded bushes for the securing bolts in the alternator backwards a little |
| 6 - | Bracket for additional units |
| q | Removing and fitting → Chapter |
| 7 - | 45 Nm |
| 8 - | 23 Nm |
| 9 - | Air conditioning compressor (heating) |
| q | Before fitting, check that there are dowel sleeves for centring → Item |
| 10 - | Centring bush |
| 11 - | Poly V-belt |
| q | Poly-V belt routing → Chapter |
| q | Removing and fitting → Chapter |
| q | Mark D.O.R. before removing |
| 12 - | 23 Nm |
