Leon Mk2
|
1 - | 40 Nm |
q | Apply glue to the thread → Parts Catalogue |
2 - | Oil seal |
q | Replace |
3 - | 10 Nm |
q | Loosening is not permitted |
4 - | Pressure unit |
q | For supercharge pressure regulating valve |
q | Test supercharge pressure settings → Chapter |
q | Can only be replaced together with the turbocharger |
5 - | Safety |
6 - | Exhaust turbocharger |
q | With integrated silencer |
q | Removing and fitting → Chapter |
7 - | O-ring |
q | Replace |
8 - | 10 Nm |
9 - | Intake manifold |
10 - | Gasket |
q | Replace |
q | Note installation position |
11 - | 20 Nm |
12 - | Protective plate |
13 - | 10 Nm |
14 - | Union screw, 30 Nm |
15 - | Oil supply pipe |
16 - | 40 Nm |
q | Replace |
q | Apply glue to threads and the contact surface of the head → Parts catalogue |
17 - | Exhaust manifold |
18 - | Gasket |
q | Replace |
q | Note installation position |
19 - | 20 Nm |
20 - | Union screw, 30 Nm |
21 - | 25 Nm |
q | Replace |
q | Apply glue to the thread → Parts Catalogue |
22 - | Union screw, 35 Nm |
23 - | Coolant return pipe |
24 - | 25 Nm |
25 - | Spacing sleeve |
26 - | Union screw, 35 Nm |
27 - | 10 Nm |
28 - | Coolant supply pipe |
29 - | Union screw, 35 Nm |
30 - | 30 Nm |
q | Only use genuine bolt from parts catalogue |
31 - | Support |
q | Between exhaust turbocharger and cylinder block |
32 - | 25 Nm |
33 - | Gasket |
q | Replace |
34 - | Gasket |
q | Replace |
35 - | 10 Nm |
36 - | Oil supply pipe |
q | To sump |
37 - | 10 Nm |
38 - | 10 Nm |
q | Do not alter adjustment |
q | Loosening is not permitted |