Leon Mk2
| Activated charcoal filter system: removing and fitting. |
| 1 - | Vent pipe |
| q | Check firm seating |
| q | From the Solenoid valve 1 for the active carbon filter (pulsed) -N80- in the engine compartment |
| 2 - | Pressure retention valve with connecting hose |
| q | Check firm seating |
| q | Coming from fuel tank gravitational valve |
| 3 - | Breather opening |
| q | Visible from below |
| 4 - | 10 Nm |
| 5 - | Throttle valve module |
| q | With intake silencer |
| 6 - | Solenoid valve 1 for active carbon filter (pulsed) -N80- |
| q | In engine compartment, right |
| q | Valve closed with ignition switched off |
| q | Valve is activated (pulsed) by engine control unit when engine is warm |
| 7 - | Connector |
| q | Black, 2 contacts |
| 8 - | Active carbon filter |
| q | Location: in right rear wheel housing |
| q | To remove: |
| t | Remove rear right wheel |
| t | Remove wheel housing protection |
| t | Detach pipes -1- and -2- |
| t | Remove bolt -4- and detach tank by bottom part |
