seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Fuel level sender : Removing and fitting > < Removing

Leon Mk2

Fitting
Fitting
Installation is carried out in reverse order, noting the following:
  Note
t  When inserting the fuel delivery unit ensure that the fuel gauge sender is not bent.
t  Ensure that the fuel hoses are correctly seated.
t  Before installing, moisten the flange sealing ring with fuel.
t  Fit the fuel delivery unit on the fuel tank.
   
t  Note fitting position of fuel delivery unit flange Mark on flange must align with mark on fuel tank -arrows-.
t  After installing fuel delivery unit, check that the supply, return and breather pipes are still clipped onto fuel tank.
–  Connect battery. After connecting battery, observe safety measures → Electrical system; Rep. Gr.27.
  A20-0096

Fuel level sender : Removing and fitting > < Removing