–
| Fit the tool -T20081B/1- with the sleeve guide -T20081B/5- on the end of the camshaft, and press to the stop with the sprocket securing bolt. |
–
| Separate guide sleeve -T20081B/5-. |
–
| Fit camshaft sprockets. |
Note! Note the position of sprockets with relation to the camshaft keyways. |
–
| Lock the sprocket with tool -T10016- and tighten bolts to a torque of 20 Nm. Continue tightening 1/4 turn (90°). |
–
| Fitting toothed belt → Chapter, Toothed belt: removing, installing and tensioning. |
The rest of the assembly is basically a reverse of the dismantling sequence. |
|
|
|