seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Insert the sealing flange with sender wheel by pressing > < Crankshaft sealing flange, flywheel end renew

Leon Mk2

Remover the sealing flange with sender wheel
Remover the sealing flange with sender wheel
  Note!
To show the work sequence more clearly, the sequence is described for a removed engine.
Work sequence
–  Remove the pressure plate.
–  Remove the flywheel. Immobilising it with the counter support -T20075A-
–  Install intermediate plate.
–  Position crankshaft at TDC cylinder 1 → Chapter, Valve timing: checking.
–  Remove sump → Chapter.
   
–  Remove engine speed sender -arrow-.
–  Undo sealing flange securing bolts.
  N13-0380
–  Screw Qty. 3 M6×35 mm bolts into the threaded holes -arrows- of the sealing flange.
–  Screw in the bolts, alternating between them max. ½ turn (180°) per bolt, in the sealing flange and separate it from the crankshaft together with the sebder wheel.
  N13-0381

Insert the sealing flange with sender wheel by pressing > < Crankshaft sealing flange, flywheel end renew