seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing oil pressure switchF1 > < Checking oil pressure switch

Leon Mk2

Checking oil pressure
Checking oil pressure
Special tools and workshop equipment required
   
t  Oil pressure tester -VAG 1342-
Operation process
l  Oil level OK
l  Engine oil temperature, approx 80 ℃.
–  Remove the oil pressure switch -F1- → Chapter.
–  Attach the oil pressure tester -VAG 1342- to the borehole for the oil pressure switch -F1-.
–  Screw in the oil pressure switch for sealing into the oil pressure tester -VAG 1342-.
–  Start the engine.
l  Oil pressure at engine idle: minimum 0.8 bar.
l  Increase engine speed further. At 2000 rpm and an oil temperature of 80 °C the oil pressure should be at least 1.5 bar.
At higher engine speeds, the oil pressure must not exceed 5.0 bar. If oil pressure exceeds 5.0 bar:
–  Renew oil pump.
  W00-0516

Removing and installing oil pressure switchF1 > < Checking oil pressure switch