seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Oil filter bracket, oil pressure, oil radiator and oil supply pipe > < Removing and installing oil sump

Leon Mk2

Oil pump: removing and installing
Oil pump: removing and installing
   
Removal:
–  Remove sump → Chapter.
–  When oil pump is to be renewed, unscrew bolts -4- and remove oil intake pipe -3-.
–  Unscrew bolts -arrows- and remove baffle -2-.
–  Detach oil pump -1- from toothed belt and remove pump.
  A17-10547
Installation
l  Tightening torques → Chapter
Installation is carried out in reverse order, noting the following:
  Note
Renew O-ring.
–  Insert new dowel sleeves when oil pump has no dowel sleeves -arrows- for centring oil pump.
–  Check oil pump for ease of movement, turn toothed belt pulley with one finger for this.
  Note
Renew tight or sticking oil pump.
–  Check toothed belt for oil pump.
  Note
t  Renew damaged toothed belt.
t  The toothed belt may hang itself out after continuous operation. This is not a malfunction.
–  Attach the oil pump with the toothed belt sprocket into the toothed belt and screw together using the baffle plate.
–  Install sump → Chapter.
–  Replenish engine oil and check oil level → Chapter.
  A17-10548

Oil filter bracket, oil pressure, oil radiator and oil supply pipe > < Removing and installing oil sump