Leon Mk2
Assembly overview - parts of exhaust gas recirculation system |
1 - | Bolt, 9 Nm |
2 - | Exhaust gas recirculation pipe |
q | With flexible joint; do not bend flexible joint as there is a risk of crack generation |
3 - | Bolt, 9 Nm |
4 - | Seal |
q | Replace |
5 - | Vacuum line |
q | Do not alter shape. |
q | Vacuum hose connection diagram → Chapter |
6 - | Bolt, 9 Nm |
7 - | Seal |
q | Replace |
8 - | Exhaust gas recirculation pipe |
q | With flexible joint; do not bend flexible joint as there is a risk of crack generation |
9 - | Bolt, 9 Nm |
10 - | Clamp, 4 Nm |
11 - | exhaust gas recirculation radiator |
q | With integrated exhaust gas recirculation valve -N18- with exhaust gas recirculation potentiometer -G212-. |
q | Checking changeover → Chapter. |
q | removing and fitting → Chapter |
12 - | Bolt, 9 Nm |
13 - | Seal |
q | Replace |
14 - | Seal |
q | Replace |
15 - | Exhaust gas recirculation pipe |
q | With flexible joint; do not bend flexible joint as there is a risk of crack generation |
16 - | Nut, 22 Nm |
17 - | Bolt, 9 Nm |
18 - | Seal |
q | Replace |