seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Accelerator control: Assembly overview > < Removing and installing upper part of fuel filter

Leon Mk2

Removing and installing fuel filter
Removing and installing fuel filter
   
Removal:
–  Open quick-release fasteners -A- and -B- of fuel lines.
  N20-10436
–  Disconnect electrical connector -1- at fuel temperature sender -G81-.
–  Open clamps -2+4- and pull off fuel hoses.
  A10-11184
–  Hang the coolant hose -1- out of the bracket and push to one side.
–  Remove securing bolts → Item.
–  Remove fuel filter upwards.
Installation
Installation is carried out in reverse order, noting the following:
t  Route fuel hoses without kinking.
t  Ensure that fuel hose connections are tight.
t  Do not interchange fuel supply and return lines (return line is blue or with blue markings and supply line is white or with white markings).
t  Clip fuel and coolant hoses into retainers again.
–  Purge the fuel system → Chapter.
  N20-10437

Accelerator control: Assembly overview > < Removing and installing upper part of fuel filter