| t
| Spring-type clip pliers -VAS 5024- are recommended for installation of spring-type clips. |
| t
| Do not install hose connections with lubricant containing oil. |
| t
| Charge air system must be free of leaks. |
| t
| Before screwing on oil supply line, fill turbocharger at connection with engine oil. |
| t
| After installing turbocharger run engine for approx. 1 minute at idling speed, do not rev engine. This ensures that the turbocharger/compressor is adequately lubricated. |
| t
| Renew self-locking nuts. |
| Hose connections with push-on connectors → Chapter |
| Assembly overview - turbocharger: Engine code ANU → Chapter |
| Assembly overview - turbocharger: Engine codes ASZ, BTB → Chapter |
| Assembly overview - turbocharger: Engine codes AUY, BVK → Chapter |
| Assembly overview - charge air cooling: Engine codes ANU, AUY, BVK → Chapter |
| Assembly overview - charge air cooler: Engine codes ASZ, BTB → Chapter |
| Checking charge air system for leaks → Chapter |
| Charge pressure control hose routing diagram: Engine code ANU → Chapter |
| Charge pressure control hose routing diagram: Engine codes ASZ, AUY, BTB → Chapter |
|
|
|
Note
