seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Safety precautions when working on fuel supply system > < Checking oil cooler for leaks

Leon Mk2

Removing and installing parts of fuel supply system
Removing and installing parts of fuel supply system
  Note
t  Hose connections are secured with screw-type, spring-type or clamp-type clips.
t  Always replace clamp-type clips with screw or spring-type clips.
t  Fuel hoses on engine must be secured with spring-type clips only. The use of clamp or screw-type clips is not permissible.
   
t  Spring-type clip pliers -VAS 5024- are recommended for installation of spring-type clips.
Safety precautions when working on fuel supply system → Chapter.
Rules for cleanliness → Chapter.
Assembly overview - fuel tank → Chapter
Removing and installing fuel tank → Chapter
Assembly overview - fuel filter: Engine codes ANU, AUY, BVK → Chapter
Assembly overview - fuel filter: Engine codes ANU, ASZ, AUY, BTB, BVK → Chapter
Assembly overview - heat exchanger for fuel cooler → Chapter
Removing and installing fuel cooler: Engine codes ANU, AUY, BVK → Chapter
Emptying fuel tank → Chapter.
Removing and installing fuel delivery unit → Chapter.
Removing and installing fuel gauge sender → Chapter.
Checking fuel pump → Chapter.
Checking tandem pump → Chapter
Removing and installing tandem pump → Chapter
Assembly overview - accelerator mechanism → Chapter
  W00-1179

Safety precautions when working on fuel supply system > < Checking oil cooler for leaks