seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Assembly overview - accelerator mechanism > < Removing

Leon Mk2

Installing
Installing
Installation is carried out in the reverse order. When installing, note the following:
  Note
t  Ensure that tandem pump coupling seats properly in camshaft.
t  Always replace tandem pump seals.
   
–  Connect return hose -3- (blue marking) to return connection of tandem pump.
–  Install tandem pump and tighten upper securing bolts to 20 Nm.
–  Tighten lower securing bolts to 10 Nm.
–  Connect supply hose -2- (white marking) to supply connection and vacuum line -1- from brake servo to tandem pump -4-.
  N15-0254
–  Connect supply hose -1- (white marking) to fuel filter.
–  Connect hand vacuum pump -V.A.G 1390- and water drainage container -V.A.G 1390/1- to return hose -2- (blue marking) of fuel filter.
–  Operate hand vacuum pump until fuel comes out of return hose. Be careful that no fuel is sucked into hand vacuum pump.
–  Attach return hose -2- (blue marking) to fuel filter.
  N15-0268

Assembly overview - accelerator mechanism > < Removing