Leon Mk2
Exhaust gas turbocharger : component overview |
1 - | Exhaust-gas recirculation line |
q | With coupling element: Do not bend the belt, risk of cracking |
2 - | Gasket |
q | Replace |
3 - | Bolt |
q | 15 Nm |
4 - | Oil supply pipe |
q | Check for continuity. |
q | Before installing, fill turbocharger with engine oil at oil supply line connection. |
5 - | Oil return line |
6 - | Gasket |
q | Replace |
7 - | Nut |
q | 20 Nm |
8 - | Heat shield |
9 - | Turbocharger |
q | Can only be renewed complete with exhaust manifold and vacuum unit. |
q | removing and fitting → Chapter |
10 - | Seal |
q | With spring |
q | Check position when installed |
11 - | O-ring |
q | Replace |
12 - | Pulsation damper |
13 - | Bolt |
q | 10 Nm |
14 - | Suction line |
15 - | Bolt |
q | 20 Nm |
16 - | O-ring |
q | Replace |
17 - | Bracket |
q | For electrical cables. |
18 - | Bolt |
q | 8 Nm |
19 - | Heat shield |
20 - | Gasket |
q | Replace |
21 - | Nut |
q | 20 Nm |
22 - | Exhaust gas temperature sender 1 -G235- |
q | removing and fitting → Chapter |
23 - | Bolt |
q | 20 Nm |
24 - | Bracket |
q | For turbocharger. |
25 - | Bolt |
q | 10 Nm |
26 - | O-rings |
q | Replace |
27 - | Banjo bolt |
q | 40 Nm |
28 - | O-rings |
q | Replace |
29 - | Banjo bolt |
q | 30 Nm |
30 - | O-rings |
q | Replace |
31 - | Nut |
q | 24 Nm |
|