Leon Mk2
Assembly overview - front exhaust pipe with catalytic converter and particulate filter |
1 - | From turbocharger |
2 - | Gasket |
q | Renew |
3 - | 25 Nm |
q | Renew |
4 - | Lambda probe -G39-, 50 Nm |
q | Grease threads only with high-temperature paste -G 052 112 A3-, high-temperature paste -G 052 112 A3- must not get into the slots of probe body. |
q | To remove use lambda probe open ring spanner set -3337- |
5 - | To pressure differential sender -G505- |
6 - | Control line, 45 Nm |
7 - | Marking bead |
q | Push clamp onto marking bead. |
8 - | Clamp, 25 Nm |
9 - | To exhaust pipe with silencer |
10 - | Particulate filter |
11 - | Temperature sender before particulate filter -G506-, 45 Nm |
q | Lubricate thread of sender using high-temperature paste -G 052 112 A3- |
12 - | Catalytic converter |
13 - | Bolt |
q | Renew |
14 - | Retaining ring |
q | Renew if damaged. |
15 - | Bracket |
16 - | 25 Nm |
17 - | Front exhaust pipe |