seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Engine oil filling levels and specifications > < Camshaft: Installing and removing:

Leon Mk2

Lubricating system components: Installing and removing:
Lubricating system components: Installing and removing:
  Note
t  If during repairs to the engine, large quantities of metal shavings and particles produced by wear and erosion, for example from the bed plate bearings or conrod bearings, to avoid further damage derived from this problem, apart from a perfect clean, the oil radiator must be replaced.
t  The oil level must not be above max. mark on dipstick - danger of damage to catalytic converter. Marks → Fig.
t  Engine oil filling levels and specifications → Chapter
t  Lubrication system: Assembly overview. → Chapter
t  Check oil level → Fig.
t  Oil sump: removing and fitting → Chapter
t  Oil pump: removing and fitting → Chapter
t  Oil supply pipe → Chapter.
t  Oil pressure and oil pressure switch: check → Chapter
   

Engine oil filling levels and specifications > < Camshaft: Installing and removing: