Leon Mk2
|
| t | Tightening order for the attachment bolts securing the compact bracket to the engine block → Fig. |
| 1 - | 10 Nm + 90° (1/4 turn) |
| q | 4x |
| q | replace |
| 2 - | Pulley / damper |
| 3 - | 25 Nm |
| 4 - | Alternator |
| 5 - | Tensioning device for Poly-V belt: |
| q | Rotate using a 16 mm spanner for releasing the tension on the Poly-V belt → Chapter |
| 6 - | Compact bracket |
| q | For alternator and air conditioner's compressor |
| 7 - | 25 Nm |
| 8 - | 45 Nm |
| q | 6x |
| q | Follow the correct tightening order → Fig. |
| 9 - | Retainer |
| q | For the lower part of the supercharger air tube |
| 10 - | 10 Nm |
| q | 2x |
| 11 - | 25 Nm |
| q | 3x |
| 12 - | Air conditioning compressor |
| 13 - | Dowel sleeves |
| 14 - | Poly-V belt |
| q | Mark direction of rotation before removing |
| q | check wear |
| q | Do not bend the belt |
| q | removing and fitting → Chapter |
