seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Crankshaft seal, pulley side: Replace > < Sealing flange and flywheel: Assembly overview, engine code BMT

Leon Mk2

Flywheel: Installing and removing:
Flywheel: Installing and removing:
Special tools and workshop equipment required
   
t  Hose clamp -T20176-, see equivalent → Anchor
Removal:
  W00-2458
–  Fix counterhold -T20176- in the adapter -T20172B- or in the cylinder block orifice and immobilise the flywheel.
–  Mark the position of the flywheel on the crankshaft with a permanent marker.
–  Extract the bolts fixing the flywheel and remove it.
Fitting .
Installation is carried out in the reverse order of removal while noting the following:
–  Position the flywheel on the crankshaft in the previously marked position.
–  Replace bolts and tighten to prescribed torque → Item .
  E13-10015

Crankshaft seal, pulley side: Replace > < Sealing flange and flywheel: Assembly overview, engine code BMT