Supercharger air system with exhaust gas turbocharger: checking. |
Note t
| All of the hose connections should be well secured |
t
| The supercharger air system should not leak |
t
| Renew self-locking nuts. |
t
| Fill the turbocharger using engine oil, for the connection junction before tightening the oil feed tube. |
t
| Following the fitting of the turbocharger, start the engine and let it idle for about 1 minute without accelerating. In this way, lubrication of the turbocharger is guaranteed. |
t
| Exhaust turbocharger with accessory parts - assembly overview → Chapter. |
t
| Exhaust turbocharger: removing and installing (engine codes ASZ, ATD, AXR, BLT, BPX and BUK → Chapter |
t
| Turbocharger: Removing and installing, engine code BMT → Chapter |
t
| Exhaust system components: Assembly overview. → Chapter |
t
| Supercharger: removing and installing (engine codes ASZ, ATD, AXR, BLT and BMT → Chapter |
t
| Supercharger: removing and installing (engine codes BPX and BUK) → Chapter |
t
| Intake manifold pressure sender -G71-with air intake temperature sender-G72-: removing and fitting → Chapter |
t
| Leaks on the supercharger system: checking → Chapter. |
|
|
|