Intercooler system components: assembly overview |
Caution If a mechanical fault is detected on the turbocharger, for example, a broken blade wheel, changing the turbocharger is not enough. To avoid subsequent damage, carry out the following operations: |
t
| Ensure that the air filter housing, the cartridge and the vacuum hoses are not dirty. |
t
| Ensure that there are no foreign bodies in the supercharger air circuit and the intercooler. |
If foreign bodies are found in the supercharger air system, the supercharger air circuit should be cleaned and, if necessary, the intercooler replaced. |
|
Note t
| The supercharger air system should not leak |
t
| The supercharger air system hoses are secured using elastic spring type clips or couplings. If couplings are used, the following points should be taken into account: |
–
| Fit the supercharger air system hoses and observe the assembly instructions → Chapter. |
|
|
|