–
| Access through the fuel tank opening, separate the conduit -1- to the spray jet, for this press the clip to release it. |
–
| Remove the fuel supply conduit -2- of the fuel supply unit. |
–
| Remove the fuel supply unit . |
Note t
| When removing the fuel supply unit, do not bend the floater arm of the fuel level gauge sender -G-. |
t
| Note that there is still fuel in the fuel delivery unit. |
Installation is carried out in the reverse order; note the following: |
Note t
| When inserting fuel delivery unit, ensure that fuel gauge sender -G- is not bent. |
t
| Make sure that fuel hoses are securely fitted. |
|
|
|