Leon Mk2
| Overview: fuel delivery unit and fuel gauge sender |
| 1 - | Fuel delivery unit |
| q | Removing and installing → Chapter. |
| q | Checking fuel pump (electrical test) → Chapter |
| 2 - | Seal |
| q | Renew |
| q | Place dry ring gasket in the opening of the fuel tank. |
| 3 - | Fuel supply line |
| q | Black |
| q | To fuel filter. |
| q | Do not kink. |
| q | Connected to connection marked „V“ on sealing flange |
| q | To disconnect from flange, press release tab on connection |
| q | Install on fuel tank |
| 4 - | Fuel return line |
| q | Blue |
| q | From fuel cooler. |
| q | Do not kink. |
| q | Connected to connection marked „R“ on sealing flange |
| q | To disconnect from flange, press release tab on connection |
| q | Install on fuel tank |
| 5 - | Electrical connector |
| q | For fuel pump (pre-supply pump) -G6- and fuel gauge sender -G- |
| 6 - | Locking ring, 110 Nm |
| q | Remove and install using wrench -T10202-. |
| 7 - | Fuel gauge sender -G- |
| q | Checking resistance values → Chapter |
| q | Removing and installing → Chapter. |
