SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Contact corrosion >
< Rules for cleanliness when working on fuel supply system, injection system and turbocharger
Leon Mk2
Power unit
4-cylinder engine (2.0l 4V, TDI Common Rail) / Technical data
Technical data / neral_repair_instructions/">General repair instructions
Fuel system: checking seal
Fuel system: checking seal
Fuel system: checking seal
–
Leave the engine running a few minutes at medium speed.
–
Switch off ignition.
–
Check the entire fuel system for leaks.
–
The affected component should be replaced if there are leaks even if the tightening torque is correct.
–
Perform next a test drive in which you accelerate fully at least once.
–
Immediately check again the high pressure zone to look for leaks.
Power unit
4-cylinder engine (2.0l 4V, TDI Common Rail) / Technical data
Technical data / neral_repair_instructions/">General repair instructions
Fuel system: checking seal
Contact corrosion >
< Rules for cleanliness when working on fuel supply system, injection system and turbocharger
