SEAT Workshop Service and Repair Manuals > Leon Mk2 > Power unit | 4-Cylinder injection engine (1.4 l engine) | Enginecrankshaft group, pistons | Engine block, flanges | Crankshaft sealing flange, on the flywheel side: replacement | D - Press the sender wheel with the assembly device T10134 onto the crankshaft flange

D - Press the sender wheel with the assembly deviceT10134 onto the crankshaft flange

D - Press the sender wheel with the assembly device -T10134- onto the crankshaft flange

–	Tighten the hexagonal nut of the assembly device -T10134- to a torque of 35 Nm using the torque wrench -V.A.G 1331- and the insertable terminal e/c 24 -V.A.G 1332/11-.

Note

A small air gap must be present between cylinder block and sealing flange after tightening hexagon nut to 35 Nm.