The identification of the control unit is displayed on the screen, together with its code -2-, the chassis number in the middle, and the electronic immobiliser identification number. |
Note This information can be printed out. Now, press the “Print” button. |
Select diagnostic function |
–
| Press button “02 - Interrogate fault memory” on display. |
–
| If no fault is stored in engine control unit “0 fault(s) detected” is displayed. |
–
| If faults are stored in the engine control unit, they will be displayed as a list. |
–
| Press button “05 - Erase fault memory” on display. |
–
| Press function “06-End output”. |
Note
|
|
|