seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Fuel supply, gas operation > < Removing and installing coolant pump pulley

Leon Mk2

Removing and installing coolant circulation pumpV50
   
Removing and installing coolant circulation pump -V50-
Special tools and workshop equipment required
t  Refractometer -T10007-
t  Hose clip pliers -VAS 6340-
t  Torque wrenches -V.A.G 1331-

Removing
–  Remove lower engine splash guard.
–  Drain coolant → Chapter.
   
–  Remove spring-type clips -arrow- and pull coolant hoses off.
–  Pull connector -1- off and remove securing bolt -2-.
–  Remove continued coolant circulation pump -V50-.
Fitting
Installation is carried out in the reverse order. When installing, note the following:
Specified torque for securing bolt: 10 Nm.
  N19-10172

Fuel supply, gas operation > < Removing and installing coolant pump pulley