| Removing and installing parts of lubrication system |
Note | t
| Finding metal shavings or a large quantity of small metal particles during engine repair could indicate that the conrod bearings are damaged. To prevent this from causing further damage, perform the following repairs: |
| t
| Thoroughly clean oil channels. |
| t
| Replace the oil filter. |
| t
| The oil level must not be above the max. mark - danger of damage to catalytic converter! Markings → Fig.. |
| Engine oil, oil capacities, engine oil specification → Chapter |
| Check the pressure and the oil pressure switch → Chapter |
|
|
|
