| t
| Pliers -T20174-, see equivalent → Anchor |
Note | To perform these tasks, the battery earth strap must be removed. Therefore, you must check whether the vehicle has a coded radio. If so, refer to the anti-theft coding. |
| –
| Remove the upper part of the inlet manifold → Chapter. |
Note | Cover the intake channels of the lower intake manifold element using a clean cloth. |
| –
| Remove the upper toothed belt guard |
| –
| Remove the staples secure the cables for the spark plugs. |
| –
| Remove the staples secure the hose for the auxiliary air pump. |
| –
| Remove the staple secure the cable for the air pressure sensor in the intake manifold. |
| –
| Unscrew the bolts in cylinder head cover and remove it. |
Note | Replace the cylinder head gasket if it is damaged. |
| Fitting is carried out in reverse order, noting the following: |
Note | t
| On reconnecting battery, remember to enable the vehicle equipment (radio/radio navigation system, clock, electric window lifters) in line with the Instructions Manual. |
| t
| All the cable fixings that are opened or cut during removal of the cylinder head must be fitted in the same position when refitting the engine. |
|
|
|
