Leon Mk2
Active carbon filter system: removing and fitting |
1 - | Vent pipe |
q | Check firm seating |
q | Of solenoid valve 1 for the active carbon filter -N80- (in the engine compartment) |
2 - | Pressure retention valve with connecting hose |
q | Check firm seating |
q | Coming from fuel tank gravitational valve |
3 - | Breather opening |
q | Visible from below |
4 - | 10 Nm |
5 - | Throttle valve module |
q | With intake silencer |
6 - | Solenoid valve 1 for active carbon filter system -N80- |
q | In engine compartment, right |
q | Valve closed with ignition switched off |
q | Valve is activated (pulsed) by engine control unit when engine is warm |
7 - | Connector |
q | Black, 2 contacts |
8 - | Active carbon filter |
q | Location: in right rear wheel housing |
q | To remove: |
q | Remove rear right wheel |
q | Remove wheel housing protection |
q | Remove pipes → Item and → Item |
q | Unscrew bolt → Item and remove tank from below |