seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Assembly overview - parts of lubrication system > < Removing and installing parts of lubrication system
Engine oil
Engine oil
Engine oil specifications:
Vehicles with engine code AJH
l  Use engine oils conforming to VW standard 500 00, 501 01 or 501 00. Only in exceptional cases: multigrade oils or single-grade oils conforming to API-SF or SG.
  Note!
However, engine oil conforming to VW standard 503 00 may also be used. This engine oil is designed for long maintenance intervals.
Vehicles with engine code AWC
(Engine oil specifications with long-life service)
l  New VW standard (specially developed, ageing resistant) initial filling: VW standard 503 00 (VW TL 52 173).
  Note!
t  The engine is filled at the factory with engine oil conforming to VW standard 503 00. This engine oil is designed for long maintenance intervals. However, the engine oils listed below can also be used.
t  Engine oils conforming to VW standard 500 00, 501 01 or 502 00 can be used furthermore. The oil must then be changed every 12 months or every 15,000 km and the service interval display must be programmed accordingly. Procedure: → Booklet10.1
Oil capacities:
With oil filter, 4.5 l → Note
1)  Up-to-date figures → Exhaust emissions test binder
   

Assembly overview - parts of lubrication system > < Removing and installing parts of lubrication system