Leon Mk2
Removing and installing parts of charge air cooling system: engine code AWC |
1 - | Intake hose |
q | From air filter |
2 - | 10 Nm |
3 - | Pressure regulating valve |
q | For crankcase breather |
4 - | Connecting hose |
q | To pipe for crankcase breather. |
5 - | Vacuum hose |
q | From charge pressure control solenoid valve -N75- |
q | Schematic diagram of turbocharging system: engine code AWC → Chapter. |
6 - | Air pipe |
q | Attached to cylinder head cover |
7 - | Breather line |
q | With connector. |
q | From non-return valve for activated charcoal filter system. |
q | Schematic diagram of turbocharging system: engine code AWC → Chapter. |
8 - | Air intake hose |
q | Observe assembly marks |
q | To turbocharger |
q | Schematic diagram of turbocharging system: engine code AWC → Chapter. |
9 - | Air intake hose |
q | To throttle valve module -J338- |
10 - | Breather hose |
q | From exhaust gas recirculation valve -N18- |
q | Schematic diagram of turbocharging system: engine code AWC → Chapter. |
11 - | Air pipe |
12 - | O-ring |
q | Renew if damaged. |
13 - | Charge air pressure sender -G31- |
q | Checking → Chapter. |
14 - | 6 Nm |
15 - | Air intake hose |
16 - | Bracket |
q | For charge air cooler |
17 - | Charge air cooler |
q | Removing and installing → Chapter. |
18 - | Air intake hose |
q | Observe assembly marks |
19 - | Bracket |
q | For air pipe → Item. |
20 - | 20 Nm |
21 - | Air pipe |
q | Adjust longitudinally in bracket ( → Item) so that air pipe is not installed under tension. |
22 - | Breather hose |
q | To connection on intake manifold. |
q | Schematic diagram of turbocharging system: engine code AWC → Chapter. |
23 - | Overrun shut-off valve |
q | Checking → Chapter. |
24 - | Air intake hose |
q | From turbocharger |
q | Schematic diagram of turbocharging system: engine code AWC → Chapter. |
25 - | 25 Nm |
26 - | Bracket |
q | For air pipe → Item. |
q | Attached to cylinder block. |
27 - | 25 Nm |
q | Renew. |
28 - | Bracket |
q | For air pipe → Item. |
q | Secured to sump. |