Parts of cooling system: Removing and installing |
WARNING When opening the expansion tank, extremely hot vapour may be released; cover the cap with a cloth and open carefully. |
|
Note t
| When the engine is hot the cooling system is under pressure. If necessary, release pressure before beginning repair work. |
t
| Hose clip pliers -VAS 6340- or spring-type clip pliers -VAS 6499- are recommended for installation of spring-type hose clips., |
t
| Replace seals and gaskets. |
t
| The arrow markings on the coolant pipes and on the ends of the hoses must be aligned with each other. |
t
| Coolant pump: removing and installing → Chapter |
t
| Coolant thermostat: Removing and installing, verification → Chapter |
t
| Coolant pipe: removing and installing → Chapter |
t
| Radiator: removing and installing → Chapter |
t
| Cooling system: checking for leaks → Chapter |
t
| Radiator fan -V7- and fan 2 of the radiator -V177-: removing and installing → Chapter |
|
|
|