seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Engine oil specifications > < Valves: check

Leon Mk2

Cooling system components: Removing and installing
Cooling system components: Removing and installing
  Note
t  If large quantities of metal shavings or particles are found in the engine oil when repairing the engine, the oil passages must be cleaned carefully, and the oil cooler renewed in order to prevent further damage occurring later.
t  The oil level must not be above the MAX mark. - Risk of damage to catalytic converter!
t  Oil jets and pressure release valve → Fig.
t  Engine oil specification → Chapter
t  Oil capacity → Chapter
t  Check oil level → Chapter
t  Lubrication System - Assembly overview → Chapter
t  oil level and oil temperature sender -G266-: removing and installing → Chapter
t  Oil filter bracket with oil cooler - Assembly overview → Chapter
t  Oil sump: removing and installing → Chapter
t  Oil pump: removing and installing → Chapter
t  Oil filter bracket with oil cooler: removing and installing → Chapter
t  Oil pressure switch -F1-: removing and installing → Chapter
t  Oil pressure and oil pressure switch: check → Chapter
   

Engine oil specifications > < Valves: check