seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Fuel tank, vehicles with four wheel drive > < Fuel delivery unit: Removing and installing

Leon Mk2

Fuel gauge sendersG: Removing and installing
Fuel gauge senders -G-: Removing and installing
t  Removing → Anchor
t  Fitting → Anchor
Removing
Observe safety precautions → Chapter.
Observe rules for cleanliness → Chapter.
–  Remove fuel delivery unit → Chapter.
   
–  Release the cable connector tabs -1- and -2- and disconnect.
–  Lever off retaining lugs -3- and -4- using a screwdriver and remove the Fuel gauge sender -G- by pulling downwards -arrow- .
Installing
Fit in reverse order from removal, remembering the following:
–  Fit fuel gauge sender into the guides on fuel delivery unit and press upwards until it clicks into place.
–  Connect the connectors and ensure that they clip in securely.
–  Install fuel delivery unit → Chapter.
  A20-0706

Fuel tank, vehicles with four wheel drive > < Fuel delivery unit: Removing and installing